Are you still worrying about the large-scale cleaning work? Please take a look at our handheld cleaning machine.It is made of selected good materials, and is not only powerful but also very easy to use. The wide brushes can help you sweep a large area of floor at one time and finish the sweeping work easily and quickly. High-quality Material: It is made of high-quality aluminum alloy, steel, and PP for durability with good hardness and corrosion resistance. Powerful and Efficient: It has a 1.7kw power two-stroke engine with a high speed of 6,500-8,500rpm.
The strong power allows you to complete the sweeping work easily, improve work efficiency, and save time. Long Endurance Time: Its fuel tank is capable of holding 0.26 gal of fuel, which is a huge capacity. This gives the broom a very long endurance time without frequent refueling.Large Cleaning Area: The large cleaning brush with a size of 22.059.25 inches can clean large areas of the ground in one go, allowing you to complete the cleaning work faster. Stable Engine: The dense heat dissipation holes on the casing help the engine dissipate heat quickly and promptly. Moreover, the air filter helps to filter impurities in the air and reduce the wear and tear of dust and sand on the engine, which can achieve stable machine operation. Convenient to Use: Its handle can be adjusted in height and angle at will by loosening the screws, so you can adjust it to a suitable position for use according to your height and arm length, making it more convenient to use. In addition, it comes with a comfortable back strap so that you can easily achieve long-term work.
Safe to Use: It can only be activated by pressing both switches simultaneously, which can prevent accidental touch of the throttle switch. The push-button flameout switch also makes it safer for you to use. Simple Installation: Simple construction and a full complement of tools allow you to quickly install and start using it according to the detailed instructions.
Protective Package: The double wrapping of foam and cardboard boxes can effectively protect the product in transit. Customer Service: We aim to provide quality products and services.
We will reply and solve the problem for you as soon as possible. Curved Baffle : The baffle (23.6213.395.12 inches) above the brush prevents mud or water from splashing during operation. It helps keep the user and the machine clean. Quick Connector: The easy-to-use connector allows for quick disassembly and assembly of the cleaning machine, making it more convenient to handle. It can be used to sweep snow, leaves, soil, mud, and various types of dirt, suitable for combing artificial lawns, as well as cleaning artificial grasslands, streets, and farms.
Press the pump oil bubble and suck the fuel into the carburetor. Turn on the ignition switch to the On position. Tighten the fuel tank cover.
Note: It is not necessary to close the valve when starting the hot engine. Note: After pulling 3-5 times, it can be started. If there is a reaction to start but it fails to start, please open the valve and quickly pull the start handle again. After the engine starts, open the choke valve.Note: Keep the choke valve open in the working condition. Material: Aluminum Alloy, Steel, PP. Power: 1.7kw / 2.3hp. Fuel Tank Volume: 1L/0.26gal. Fuel Ratio: 1 Engine Oil: 25-30 Gasoline (Based on Engine Oil Grade FD Grade 1:40-50). Overall Length: 189cm /74.41inch. Brush Size(LW): 5623.5cm/22.059.25inch. Baffle Size: 603413cm/23.6213.395.12inch. Overall Driven Rod Length: 119cm/46.85inch.
Engine Size: 28.526.517.5cm/11.2210.436.89inch. Package Size: 11033.530cm/43.3113.1911.81inch. Net Weight: 9.85kg /21.72 lbs. Gross Weight: 12.6kg/27.78 lbs.Please note that the fuel should be dispensed as you use it, do not use fuel that has been mixed for more than 7 days, and you need to empty the fuel tank if you have not used it for a long time. Please note that only two-stroke engine oil should be used.
Please note that the fuel should be kept away from the fire source, and the fuel concentration can be increased appropriately when the machine is new and the temperature is high. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Before use, please carefully install according to the instructions.During installation, the inner shaft should be parallel to the outer aluminum tube (the visual difference is 0.5-1cm parallel with the aluminum tube), and the inner shaft should be about 0.5cm long to ensure that the aluminum tube is fully installed to the bottom of the gear box; Improper installation of aluminum pipes can lead to problems such as stalling. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.