4-Stroke 7.5HP Gas Powered Cement Mixer Hand Held Concrete Vibrator Air Cooled

4-Stroke 7.5HP Gas Powered Cement Mixer Hand Held Concrete Vibrator Air Cooled. Concrete Vibrator 7.5hp Hand Held Construction Mixer Cement. As We All Know, the Higher the Power of the Concrete Vibrator, the Better the Vibration Effect. Our Concrete Vibrator Has a High Power of 4.1kw. It Adopts the Principle of High-frequency Vibration, Which Can Quickly and Efficiently Vibrate Concrete to Make Its Surface Flat and Dense Inside, Thus Achieving a Good Curing Effect.

This High-powered Construction Tool Will Make Your Work Easier and More Efficient. High-quality Material: the Product Is Made of Aluminum Alloy and the Surface Is Painted, with High Hardness, High Abrasion Resistance, Strong Pressure Resistance, and Long Service Life. Efficient Heat Dissipation: the Wide Heat Dissipation Holes Provide Efficient Heat Dissipation for the Internal Gasoline Engine, Making the Product Run More Efficiently and Smoothly.

Powerful Vibration Capability: Our 7.5 Hp Concrete Vibrator Has Powerful Vibration Force and Speed of up to 3600r/Min, Making the Concrete More Uniform Under the Mixing of the Vibrator. It Shortens the Setting Time and Saves Cement Usage, Thus Speeding up the Project. Large Work Area Coverage: the 19.69ft Long Vibrator Is Easy to Use and Has a Long Reach, Thus Effectively Expanding Your Work Area. Easy to Install: This Product Is Easy to Install.

All You Have to Do Is Plug in the Connector, Start Vibrating, Insert the Vibrating Rod into the Concrete, and Then It's Ready to Expel the Air from the Concrete. High Stability: the Round Chassis with Non-slip Silicone Feet Not Only Has More Stability but Also Can Effectively Play the Role of Shock Absorption, Thus Making Your Use Safer.

Easy to Use: This Product Uses Gasoline As Raw Material and Is Not Restricted by Electric Wire. It Allows You to Have a Higher Degree of Freedom of Operation. The Recoil Hand-pull Start Is Easy to Operate, Without Too Many Complicated Operations. Energy Saving: the Energy Consumption less than or Equal to 395g/Kw. Protective Metal Frame: It Effectively Prevents the Body of the Concrete Vibrator from Sliding, Thus Effectively Improving Your Safety in Use. Transistorized Electronic Ignition: It Improves Ignition Efficiency and Reduces Spark Plug Failure, While Also Automatically Controlling the Combustion Process to Improve Fuel Economy and Machine Performance. It Can Be Used by Those Who Insert Vibrating Rods When Placing Concrete Elements, Such As: Placing Concrete Columns, Walls, Main Beams, Secondary Beams, and Precast Elements. It Is Particularly Suitable for Pouring Small Lightweight Thin-walled Elements and for Vibrating Plastic, Semi-dry Hard, and Dry Hard Concrete. This Product Can Be Applied to Different Concrete Production Scenarios, Such As Highways, Tunnels, Bridges, Interior Decoration, Housing Construction, and Foundation Laying.

It Is an Ideal Tool Indispensable for Various Concrete Site Construction in Remote Areas Without Electricity or During Power Outages. Form: Single bar, Four Stroke.

Ignition Mode: Transistorized Electronic Ignition. Starting Method: Recoil Hand Pull Start. Cylinder Diameter: 7045mm/2.761.77in. Vibrating Pump Bore: 40mm/1.57in Inner Diameter. Vibrating Rod Length: 6m/19.69ft.

Product Size: 523945 Cm/ 20.4715.3517.71 in. Weight: 22kg/ 48.5 Lbs. Package Size: 493948 Cm/ 19.2915.3518.9in.

Weight: 18 Kg/ 39.68 Lbs. Package Size: 71654.5 Cm/ 27.9525.591.77in. After Starting, If the Concrete Vibrator Does Not Produce Vibration, You Can Usually Tap the End of the Concrete Vibrator to the Floor.

Please Be Sure to Use the Side of the Rod Head to Tap the Floor or the Housing Rod, or You Can Swing the Rod Head for a While and the Rod Head Will Start to Vibrate. When Working, the Concrete Vibrating Rod Should Be Inserted into the Concrete Vertically or at an Angle, and After Vibrating for a While, the Concrete Should Be Pumped up and down to Vibrate. After Working Continuously for Half an Hour, the Vibrating Rod Should Be Stopped for a Period of Time to Prevent the Machine from Overheating and Damaging the Machine Parts.

After Using It for a Period of Time, the Vibrating Rod Should Be Checked to See If the Threaded Connection of the Rod Head Is Loose to Prevent Mortar Water from Seeping into the Rod and Causing the Vibrating Rod Not to Vibrate. Please Read the Operating Manual Completely Before Use. And Pay Particular Attention to the Safety Instructions Included. Please Allow the Slight Color Difference Caused by the Shooting Light and the 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering. Feedback is very important to us.

It is impossible to address issues if we do not know about them! Faction is our ultimate goal.

We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.

If it's non-workdays, please kindly be patient and wait till Monday.