20 2stroke 62cc Gas Power Chainsaw Petrol Gasoline Bar Chain Saw Hand Saw 4000w

Product function description: NOTE: Installation Manual Is NOT Included Professional Installation Is Highly Recommended Description: This chain saw is sharp to cut the twigs, branches, bushes, shrubs and trees. The saw is waterproof and rustproof, easy to clean with water.

With exceptional hardness and durability, it is good for sawing, cutting, pruning and trimming wood, perfect tool for gardening, wordworking, landscaping. Features: Color: black+red Material: metal. Bar Length:20 in Pitch: 0.325'' Sprocket: 7T0.325'' Chain width: 0.058'' Power:4000W Gas Displacement:62CC(cm3) Rotating Speed:12500(rpm) Fuel capacity : 550(ML) Oil capacity : 260(ML) Voltage:12 V - Sharp to cut the twigs, branches, bushes, shrubs and trees. Good-quality slip-resistant, comfort grip handle, comfort. 20 2stroke 62cc Gas Power Chainsaw Petrol Gasoline Bar Chain Saw Hand Saw 4000w. Installation Manual Is NOT Included. Professional Installation Is Highly Recommended. This chain saw is sharp to cut the twigs, branches, bushes, shrubs and trees. Sharp to cut the twigs, branches, bushes, shrubs and trees. Good-quality slip-resistant, comfort grip handle, comfortable and easy for cutting wood, effective to increase working efficiency. Waterproof and rustproof, easy to clean with water, durable for long-lasting use.

Good for sawing, cutting, pruning and trimming wood. Perfect tool for gardening, wordworking, landscaping. Guide chain installation step diagram. Step1: Install the guide plate. Step3: Align the holes to install the side cover and screw on the nut.

Step4: Adjust the tightness of the chain. Fuel injection volume can be adjusted. The function of engine oil is to lubricate the chain, so you must wait for the oil to spray out before you can go to the tree. The ratio of gasoline to oil is 25:1 or 20:1, 20:1 is recommended (must be two-stroke oil, and Mobil two-stroke oil is recommended). Do not use four-stroke engine oil or other engine oil, otherwise it will easily cause cylinder pulling or other problems. Pull up the flameout switch. Pull the start handle 3-6 times. When you hear the machine banging, push the damper back in, otherwise the machine will not start. Turn off the air door, pull the start handle 1-3 times again, you can start normally.

Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business.

A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.